• <sub id="ihxe6"><listing id="ihxe6"><meter id="ihxe6"></meter></listing></sub>
    <samp id="ihxe6"></samp>

      1. <form id="ihxe6"></form>

        ANSI / AWWA Standards

        U.S. Pipe Fabrication meets or exceeds the latest revision of the following ANSI/AWWA standards:

        C104/A21.4 Cement-Mortar Lining for Ductile-Iron Pipe and Fittings
        C115/A21.15 Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
        C116/A21.16 Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings
        C200 Steel Water Pipe, 6 In. (150 mm) and Larger
        C205 Cement-Mortar Protective Lining and Coating for Steel Water Pipe – 4 In. (100 mm) and Larger – Shop Applied
        C207 Steel Pipe Flanges for Waterworks Service – Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
        C208 Dimensions for Fabricated Steel Water Pipe Fittings
        C210 Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
        C213 Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
        C606 Grooved and Shouldered Joints

        US Pipe Fabrication Logo
        Us Pipe Locations

        10 Locations...